المستخدم 34hs603

مستخدم منذ : 3 شهور (منذ فبراير 16)
الرتبة : مستخدم مسجل
الاسم الكامل:
السكن الحالي:
الموقع الإلكتروني: https://www.sgimco.com/
نبذة شخصية: Choose the right gripper for your automated process

Pneumatic Parallel Gripper

A parallel gripper opens and closes parallel to the object that it will be holding. These are the most widely used grippers. They are the simplest tool and can compensate for some dimensional variation.

Pneumatic Angular Gripper
An Angular gripper moves the jaws in a radial manner to rotate the jaws away from the object. This allows for the jaws to move completely away from the object. The object may also be fed directly into the jaws and possibly eliminate one additional motion.


What is a Robotic Tool Changer (QC)?

An end-effector with two mating parts, a Master-side and a Tool-side that have been designed to lock or couple together automatically, carry a payload, and have the ability to pass utilities such as electrical signals, pneumatic, water, etc. Most robot couplers use pneumatics to lock the Master- and Tool-sides together. The Automatic Robotic Tool Changers provide the flexibility for any automated process to change tools and pass various utilities. The Master-side of the Tool Changer mounts to a robot, CNC machine, or other structure. The Tool-side of the Tool Changer mounts to tooling, such as grippers, welders, or deburring tools. A Robot Tool Changer is also known as a Quick-Change device (QC), an automatic tool changer (ATC), robot tool changer, robot coupler, robotic coupler, or robotic connector.

إحصاءات 34hs603

النقاط : 100 نقاط (مصنف #4)
المواضيع : 0
الإجابات : 0
التعليقات : 0
صوت لـ : 0 إجابة
أعطى : 0 تصويت بالموجب, 0 تصويت بالسالب
الاستقبالات : 0 تصويت بالموجب, 0 تصويت بالسالب

ملصق لـ 34hs603

يرجى يا تسجيل الدخول أوالاشتراك للمشاركة في هذا ملصق الحائط.
...